|
Seat Mods and Tail Lights
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Wiper Mods: |
old ones have are jointed just above the blade. There is a screw holding the two wipers together giving the adjustability that allows the blade to set flat against the top of the window.
|
The new ones use the original arms. I cut out the rivet holding the bottom portion in the upper portion. I then made the arm shorter by about 1/2". This allows me to use a standard 13" wiper instead of the specialty 12" one. I'll post a better pic tomorrow in the light.
|
| Axle Move: |
Places the rear tire away from the body crossmember. I will eventually remove the long shackles when I reposition the front leafs.
|
| SBC 305: |
 |
| Wiring Harness |
 |
 |
| Power Steering Hose: |
I had a compression fitting in my power steering hose after the upgrade to power steering. I have now replaced it with a whole piece that is warrantied for life. |
 |
 |
| Installed the Ramsey 8000lb Winch |
 |
 |
 |
 |
 |
 |
